Skip to content

ISO Standard List

August 10, 2009
tags:
Freely Biblically available ISO Standards list as follows,
ISO 1¬タモISO 999:
¬タᄁ        ISO 1 Standard reference temperature for geometrical product specification and verification
¬タᄁ        ISO 3 Preferred numbers
¬タᄁ        ISO 7 Pipe threads where pressure-tight joints are made on the threads
¬タ ᄁ        ISO 9 Information and documentation ¬タモ Transliteration of Cyrillic characters into Roman characters ¬タモ Slavic and non-Slavic languages
¬タᄁ        ISO 16:1975 Acoustics ¬タモ Standard tuning frequency (Standard musical pitch)
¬タᄁ        ISO 31 Quantities and units
¬タᄁ        ISO 68-1 Basic profile of metric screw threads
¬タᄁ        ISO 216 paper sizes, e.g. the A4 paper size
¬タᄁ        ISO 226 Phone based on Fletcher-Munson curves
ISO 226:2003 Phone based on newer Equal-loudness contours
¬タᄁ        ISO 233:1984 Transliteration of Arabic characters into Roman characters
ᅢリ ISO 233-2:1993 Transliteration of Arabic characters into Roman characters ¬タモ     Part 2: Arabic language ¬タモ Simplified transliteration
¬タᄁ        ISO 259:1984 Documentation ¬タモ Transliteration of Hebrew characters into Roman characters
ᅢリ ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters ¬タモ Part 2: Simplified transliteration
¬タᄁ        ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
¬タᄁ        ISO 639 Codes for the representation of names of languages
ᅢリ ISO 639-1 Codes for the representation of names of languages ¬タモ Part 1: Alpha-2 code
ᅢリ ISO 639-2 Codes for the representation of names of languages ¬タモ Part 2: Alpha-3 code
ᅢリ ISO 639-3 Codes for the representation of names of languages ¬タモ Part 3: Alpha-3 code for comprehensive coverage of languages
¬タᄁ        ISO/IEC 646 internationalized 7 bit ASCII variants
¬タᄁ        ISO 657 Hot-rolled steel sections
¬タᄁ        ISO 668 Specification for Shipping Containers
¬タᄁ        ISO 690 bibliographic references
¬タᄁ        ISO 732 Photography ¬タモ 120-size and 220-size films ¬タモ Dimensions
¬タᄁ        ISO 838 Standard for punching filing holes into paper
¬タᄁ        ISO 843:1997 Conversion of Greek characters into Roman characters
¬タᄁ        ISO 999 Guidelines for the content, organization, and presentation of indexes
ISO 1000¬タモISO 9999:
¬タᄁ        ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
¬タᄁ        ISO 1007 135 film format
¬タᄁ        ISO/IEC 1539 FORTRAN programming language
¬タᄁ        ISO 1629 establishes a system of terms and nomenclature for polymers
¬タᄁ        ISO/IEC 2022 Information technology: Character code structure and extension techniques
¬タᄁ        ISO 2108 International standard book numbering (ISBN)
¬タᄁ        ISO 2145 Numbering of divisions and subdivisions in written documents
¬タᄁ        ISO 2171 Cereals and milled cereal products ¬タモ Determination of total ash
¬タᄁ        ISO 2281 Water-resistant watches
¬タᄁ        ISO 2533 Standard Atmosphere
¬タᄁ        ISO 2709 Format for information exchange (e.g. MARC)
¬タᄁ        ISO 3029 126 film format
¬タᄁ        ISO 3082 Iron ores ¬タモ Sampling and sample preparation procedures
¬タᄁ        ISO 3103 Method of brewing tea for the purpose of sensory tests
¬タᄁ        ISO 3166 codes for countries and subdivisions
ᅢリ ISO 3166-1 codes for country and dependent area names, first published in 1974
ᅢリ ISO 3166-1 alpha-2 two-letter country codes
ᅢリ ISO 3166-1 alpha-3 three-letter country codes
ᅢリ ISO 3166-1 numeric
ᅢリ ISO 3166-2 principal subdivisions of a country or dependent area.
ᅢリ ISO 3166-3 superseded ISO 3166-1 codes, first published in 1998.
¬タᄁ        ISO 3297 International standard serial number (ISSN)
¬タᄁ        ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
¬タᄁ        ISO 3602 Romanization of Japanese
¬タᄁ        ISO 3632 Quality of Saffron
¬タᄁ        ISO 3864 Safety labels
¬タᄁ        ISO 3901 International Standard Recording Code (ISRC)
¬タᄁ        ISO 3977 Design and procurement standards for gas turbine system applications
¬タᄁ        ISO 4157 Subdivision of construction works
ᅢリ ISO 4157-1: buildings and part of buildings
ᅢリ ISO 4157-2: room numbers
ᅢリ ISO 4157-3: room identifiers
¬タᄁ        ISO 4217 Currency codes
¬タᄁ        ISO/IEC 4873:1991 8-bit code for information interchange
¬タ ᄁ        ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
ᅢリ ISO 5167-1 Part 1: General principles and requirements
ᅢリ ISO 5167-2 Part 2: Orifice plates
ᅢリ ISO 5167-3 Part 3: Nozzles and Venturi nozzles
ᅢリ ISO 5167-4 Part 4: Venturi tubes
¬タᄁ        ISO 5218 Representation of human sexes
¬タᄁ        ISO 5455 Technical drawings: scales
¬タᄁ        ISO 5775 Bicycle tyres and rims
¬タᄁ        ISO 5800 Photographic Film speed
¬タᄁ        ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
¬タᄁ        ISO 6166 structure of an International Securities Identifying Number (ISIN)
¬タᄁ        ISO 6344 Coated abrasives ¬タモ Grain size analysis
ᅢリ ISO 6344-1 Part 1: Grain size distribution test
ᅢリ ISO 6344-2 Part 2: Determination of grain size distribution of macro grits P12 to P220
ᅢリ ISO 6344-3 Part 3: Determination of grain size distribution of micro grits P240 to P2500
¬タᄁ        ISO 6429 Information technology: Control functions for coded character sets
¬タᄁ        ISO 6438 Documentation ¬タモ African coded character set for bibliographic information interchange
¬タᄁ        ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
¬タ ᄁ        ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
¬タᄁ        ISO 7001 Public Information Symbols
¬タᄁ        ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
¬タᄁ        ISO 7098 Romanization of Chinese
¬タᄁ        ISO 7372 Trade data interchange
¬タ ᄁ        ISO/IEC 7501-1:1997 Identification cards ¬タモ Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
¬タᄁ        ISO 7736 Car radio installation space
¬タᄁ        ISO 7810 Standards for financial cards (credit and debit cards)
¬タᄁ        ISO 7811 Recording technique on identification cards
¬タᄁ        ISO 7816 Smartcards
¬タᄁ        ISO/IEC 7942 Graphical Kernel System
¬タᄁ        ISO 8090 Cycles ¬タモ Terminology
¬タᄁ        ISO 8373 Manipulating Industrial Robots ¬タモ Vocabulary
¬タᄁ        ISO 8501-1 Preparation of steel substrates before application of paints and related products
¬タᄁ        ISO 8555 Environmental management systems.
¬タᄁ        ISO 8583 Financial transaction card originated messages ¬タモ Interchange message specifications
ᅢリ ISO 8583-1 Part 1: Messages, data elements and code values
ᅢリ ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
ᅢリ ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
¬タᄁ        ISO 8601 Date and time representation
¬タᄁ        ISO/IEC 8613 Open Document Architecture
¬タᄁ        ISO/IEC 8632 Computer Graphics Metafile
¬タᄁ        ISO 8651 Graphical Kernel System language bindings
¬タᄁ        ISO/IEC 8652: Information technology ¬タモ Programming languages ¬タモ Ada
¬タᄁ        ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
¬タᄁ        ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
¬タᄁ        ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
¬タᄁ        ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
¬タᄁ        ISO/IEC 8825 ASN.1 Encoding Rules
¬タᄁ        ISO 8859 8-bit coded character sets
ᅢリ ISO 8859-1 Latin-1
ᅢリ ISO 8859-2 Latin-2
ᅢリ ISO 8859-3 Latin-3 or “South European”
ᅢリ ISO 8859-4 Latin-4 or “North European”
ᅢリ ISO 8859-5 Cyrillic
ᅢリ ISO 8859-6 Arabic
ᅢリ ISO 8859-7 Greek
ᅢリ ISO 8859-8 Hebrew
ᅢリ ISO 8859-9 Latin-5
ᅢリ ISO 8859-10 Latin-6, rearrangement of 8859-4
ᅢリ ISO 8859-11 Thai
ᅢリ ISO 8859-13 Latin-7 or “Baltic Rim”
ᅢリ ISO 8859-14 Latin-8 or “Celtic”
ᅢリ ISO 8859-15 Latin-9, revision of 8859-1
ᅢリ ISO 8859-16 Latin-10 South-Eastern European languages and others
¬タᄁ        ISO 8879 Standard Generalized Markup Language (SGML)
¬タᄁ        ISO 9000 Quality management system in production environments
¬タᄁ        ISO 9001 Quality management
¬タᄁ        ISO 9069 SGML support facilities ¬タヤ SGML Document Interchange Format (SDIF)
¬タᄁ        ISO/IEC 9075 SQL
¬タᄁ        ISO 9126 Software quality model
¬タᄁ        ISO 9141 Network interconnection of computers in a vehicle
ISO 9141-2 OBD-II standard, aka 9141 CARB standard
¬タᄁ        ISO 9241 Ergonomic requirements for office work with visual display terminals
¬タᄁ        ISO 9362 Bank Identifier Code or BIC system
¬タᄁ        ISO 9407 Shoe sizes
¬タᄁ        ISO 9564 Banking ¬タヤ Personal Identification Number (PIN) management and security (in ATM and POS systems)
¬タᄁ        ISO/IEC 9579 Remote database access for SQL
¬タᄁ        ISO 9592, ISO 9593 PHIGS (Programmer’s Hierarchical Interactive Graphics System)
¬タᄁ        ISO 9660 CD-ROM file system
¬タ ᄁ        ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
¬タᄁ        ISO 9899 C programming language
¬タᄁ        ISO/IEC 9945 Portable Operating System Interface (POSIX)
¬タᄁ        ISO 9984 Conversion of Georgian characters into Roman characters
¬タᄁ        ISO 9985 Conversion of Armenian characters into Roman characters
¬タ ᄁ        ISO 9992:1999 Financial transaction cards – Security architecture of financial transaction systems using integrated circuit cards
¬タᄁ        ISO 9999 Technical aids for persons with disabilities. Classification and terminology
ISO 10000¬タモISO 19999:
¬タᄁ        ISO 10006 Quality management ¬タモ Guidelines to quality in project management
¬タᄁ        ISO 10007 Quality management ¬タモ Guidelines for configuration management
¬タᄁ        ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
¬タᄁ        ISO/IEC 10026 Open Systems Interconnection
¬タᄁ        ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
¬タ ᄁ        ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange – 650 MB per cartridge
¬タᄁ        ISO 10160 Interlibrary Loan Application Service Definition – defines terminology used in interlibrary loan
¬タᄁ        ISO 10161 Interlibrary Loan Application Protocol
¬タᄁ        ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
¬タ ᄁ        ISO 10202:1991 financial transaction cards ¬タヤ Security architecture of financial transaction systems using integrated circuit cards
¬タᄁ        ISO 10211 Thermal bridges in building construction ¬タヤ Heat flows and surface temperatures ¬タヤ Detailed calculations
¬タᄁ        ISO 10279 BASIC programming language
¬タ ᄁ        ISO 10303 Industrial automation systems and integration ¬タモ Product data representation and exchange. Known as STEP, Standard for the Exchange of Product data
¬タᄁ        ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
¬タᄁ        ISO 10487 Connections for passenger car stereos
¬タᄁ        ISO 10628 Flow diagrams for process plants
¬タᄁ        ISO 10646 Universal Character Set (equivalent to Unicode’s character set)
¬タᄁ        ISO 10664 Hexalobular internal driving feature for bolts and screws ¬タモ Torx screw head
¬タᄁ        ISO 10957 Information and documentation ¬タモ International Standard Music Number (ISMN)
¬タᄁ        ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
¬タᄁ        ISO 11064 Ergonomic Design of Control Centres
ᅢリ ISO 11062-1:2000 Part 1: Principles for the design of control centres
ᅢリ ISO 11062-2:2000 Part 2: Principles for the arrangement of control suites
ᅢリ ISO 11062-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
ᅢリ ISO 11062-3:2004 Part 4: Layout and dimensions of workstations
ᅢリ ISO 11062-3:2005 Part 6: Environmental requirements for control centers
¬タᄁ        ISO/IEC 11172 MPEG-1
¬タᄁ        ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
¬タᄁ        ISO/IEC 11179 Information Technology ¬タモ- Metadata Registries (MDR)
ᅢリ ISO/IEC 11179-1:2004 Part 1: Framework
ᅢリ ISO/IEC 11179-2:2005 Part 2: Classification
ᅢリ ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
ᅢリ ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
ᅢリ ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
ᅢリ ISO/IEC 11179-6:2005 Part 6: Registration
¬タᄁ        ISO 11180 Postal addressing
¬タᄁ        ISO/IEC 11404:1996 Language-independent data types (See also General purpose data types)
¬タᄁ        ISO 11521 Replaced by ISO 15022
¬タᄁ        ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
¬タᄁ        ISO 11783 aka. IsoBus – J1939-based communication protocol for the agriculture industry.
¬タᄁ        ISO/IEC 11801 Information technology ¬タモ Generic cabling for customer premises
¬タᄁ        ISO 11898 Road vehicles — Controller area network (CAN)
¬タᄁ        ISO 12006 Building construction. Organization of information about construction works.
¬タᄁ        ISO 13239 High-level data link control (HDLC) procedures
¬タᄁ        ISO/IEC 13249 SQL multimedia and application packages
¬タᄁ        ISO/IEC 13250 Topic map
¬タᄁ        ISO 13346 Volume and file structure of write-once and rewritable media, which UDF is based on.
¬タᄁ        ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
¬タᄁ        ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
ᅢリ ISO 13406-1:1999 Part 1: Introduction
ᅢリ ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
¬タᄁ        ISO 13407:1999 Human-centered design processes for interactive systems
¬タᄁ        ISO 13450 110 film format
¬タᄁ        ISO 13485:2003 Comprehensive management system for the design and manufacture of medical devices.
¬タ ᄁ        ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
¬タᄁ        ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
¬タᄁ        ISO/IEC 13568:2002 Information Technology ¬タモ Z Formal Specification Notation ¬タモ Syntax, Type System and Semantics
¬タᄁ        ISO 13616 Bank Account Numbers (IBAN)
¬タᄁ        ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
¬タᄁ        ISO/IEC 13818 MPEG-2
¬タᄁ        ISO 14000 Environmental Management Standards in production environments
¬タᄁ        ISO 14001 Environmental Management
¬タᄁ        ISO 14064 Greenhouse Gases
¬タᄁ        ISO/IEC 14443 Identification cards – Contact less integrated circuit(s) cards – Proximity cards
¬タᄁ        ISO/IEC 14496 MPEG-4
¬タᄁ        ISO 14644 Standards Clean rooms and associated controlled environments
ᅢリ ISO 14644-1 Classification of Air Cleanliness
ᅢリ ISO 14644-2 Testing and Monitoring to prove Compliance
ᅢリ ISO 14644-3 Metrology & Test Methods
ᅢリ ISO 14644-4 Design, Construction and Start-up
ᅢリ ISO 14644-5 Operations
ᅢリ ISO 14644-6 Vocabulary
ᅢリ ISO 14644-7 Superlative Devices
ᅢリ ISO 14644-8 Classification of Airborne Molecular Contamination
ᅢリ ISO 14644-9 Clean Surfaces
¬タᄁ        ISO 14651 Information technology: International string ordering and comparison
¬タᄁ        ISO 14698 Standards
ᅢリ ISO-14698-1 Bio-contamination Control – General Principles
ᅢリ ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
¬タᄁ        ISO 14750 Information technology ¬タモ Open Distributed Processing ¬タモ Interface Definition Language
¬タᄁ        ISO/IEC 14755 Input methods to enter Unicode characters from ISO/IEC 10646
¬タᄁ        ISO/IEC 14882 Programming Languages ¬タヤ C++
¬タᄁ        ISO 14915 Software ergonomics for multimedia user interfaces
ᅢリ ISO 14915-1:2002 Part 1: Design principles and framework
ᅢリ ISO 14915-2:2003 Part 2: Multimedia navigation and control
ᅢリ ISO 14915-3:2002 Part 3: Media selection and combination
¬タᄁ        ISO 14971 Medical Devices – Application Of Risk Management To Medical Devices
¬タᄁ        ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
¬タᄁ        ISO 15000 Electronic business extensible Markup Language ebXML
ᅢリ ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
ᅢリ ISO 15000-2:2004 Part 2: Message service specification (ebMS)
ᅢリ ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
ᅢリ ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
ᅢリ ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
¬タᄁ        ISO 15022 Securities: Scheme for messages (Data Field Dictionary)
¬タᄁ        ISO 15099 Thermal performance of windows, doors and shading devices ¬タモ Detailed calculations
¬タᄁ        ISO 15189 Medical laboratories ¬タモ Particular requirements for quality and competence
¬タᄁ        ISO 15288 Systems engineering ¬タモ System life cycle processes
¬タᄁ        ISO/IEC 15291: Information technology ¬タモ Programming languages ¬タモ Ada Semantic Interface Specification (ASIS)
¬タᄁ        ISO/IEC 15408 Common Criteria ¬タモ Evaluation Criteria for Information Technology Security
¬タᄁ        ISO/IEC 15434 2D Data Matrix barcode
¬タᄁ        ISO/IEC 15444 JPEG 2000
¬タᄁ        ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
¬タ ᄁ        ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
¬タ ᄁ        ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test-
¬タᄁ        ISO 15686 Service life planning for constructive works in 10 parts
¬タᄁ        ISO 15693 Transponders
¬タᄁ        ISO 15706 International Standard Audiovisual Number
¬タᄁ        ISO 15707 International Standard Musical Work Code
¬タᄁ        ISO 15836 The Dublin Core metadata element set
¬タᄁ        ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
¬タᄁ        ISO 15924 Codes for the representation of names of scripts
¬タᄁ        ISO 15930 Portable Document Format PDF
¬タᄁ        ISO/IEC 15948:2003. Portable Network Graphics PNG
¬タᄁ        ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
¬タᄁ        ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
¬タᄁ        ISO/IEC 16262. ECMAScript
¬タᄁ        ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
¬タ ᄁ        ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
¬タᄁ        ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centered design
¬タ ᄁ        ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
¬タᄁ        ISO/IEC 17025 General requirements for competence of test and calibration laboratories
¬タᄁ        ISO/IEC 17799 Information technology: Code of practice for information security management
¬タ ᄁ        ISO/IEC 17894 Ships and marine technology – Computer applications – General principles for development and use of PES in marine applications
¬タᄁ        ISO 18000-7 Wireless standard for active RFID (Radio Frequency Identification)
¬タᄁ        ISO/IEC 18004: QR Code Standardization
¬タ ᄁ        ISO/IEC 18009: Information technology ¬タモ Programming languages ¬タモ Ada: Conformity assessment of a language processor (ACATS)
¬タ ᄁ        ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
¬タᄁ        ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
¬タᄁ        ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
¬タ ᄁ        ISO 18529:2000 Ergonomics of human-system interaction, Human-centered lifecycle process descriptions (available in English only)
¬タᄁ        ISO 18629 standardized Process Specification Language (PSL).
¬タᄁ        ISO 19005 PDF
¬タᄁ        ISO 19011 standard providing guidelines for quality and environmental management systems auditing
¬タᄁ        ISO 19092-1 Financial Services ¬タモ Security ¬タモ Part 1: Security framework
¬タᄁ        ISO 19092-2 Financial Services ¬タモ Security ¬タモ Part 2: Message syntax and cryptographic requirements
¬タᄁ        ISO 19101 Geographic Information: Reference model
¬タᄁ        ISO 19105 Geographic Information: Conformance and testing
¬タᄁ        ISO 19107 Geographic Information: Spatial schema
¬タᄁ        ISO 19108 Geographic Information: Temporal schema
¬タᄁ        ISO 19109 Geographic Information: Rules for Application Schema
¬タᄁ        ISO 19110 Geographic Information: Feature cataloguing methodology
¬タᄁ        ISO 19111 Geographic Information: Spatial referencing by coordinates
¬タᄁ        ISO 19111 Geographic Information: Spatial referencing by identifier
¬タᄁ        ISO 19113 Geographic Information: Quality principles
¬タᄁ        ISO 19114 Geographic Information: Quality evaluation procedures
¬タᄁ        ISO 19115 Geographic Information: Metadata
¬タᄁ        ISO 19123 Geographic Information: Coverage schema
¬タᄁ        ISO 19128 Geographic Information: Web Map Service
¬タᄁ        ISO 19131 Geographic Information: Data product specification
¬タᄁ        ISO 19136 Geographic Information: Geography Markup Language
¬タᄁ        ISO/IEC 19501 Unified Modeling Language (UML)
¬タᄁ        ISO/IEC 19502 Meta-Object Facility (MOF)
¬タᄁ        ISO/IEC 19503 XML Metadata Interchange (XMI)
¬タᄁ        ISO/IEC 19757 Document Schema Definition Languages (DSDL)
ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
ISO/IEC 19757-3 Rule-based validation ¬タモ Schematron
¬タᄁ        ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
ISO 20000¬タモISO 29999:
¬タᄁ        ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
¬タᄁ        ISO 20022 Financial Services – universal financial industry message scheme
¬タᄁ        ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
ISO/IEC TR 20943-1:2003 Part 1: Data elements
ISO/IEC TR 20943-3:2004 Part 3: Value domains
¬タᄁ        ISO 22000 Food safety management systems — Requirements for any organization in the food chain
¬タ ᄁ        ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
¬タᄁ        ISO/IEC TR 22250 Regular Language description for XML ¬タモ (RELAX)
ISO/IEC TR 22250-1:2002 RELAX Core
¬タᄁ        ISO/IEC 23270:2003 C# Programming Language
¬タᄁ        ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
ᅢリ ISO/IEC 23360-1 — Part 1: Generic specification
ᅢリ ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
ᅢリ ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
ᅢリ ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
ᅢリ ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
ᅢリ ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
ᅢリ ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
ᅢリ ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
¬タ ᄁ        ISO 23950 Library standard ANSI/NISO Z39.50 – Protocol for searching and retrieving information, usually from bibliographic records
ᅢリ ¬タᄁ        ISO/IEC 24727 Identification Cards — Integrated Circuit Card Programming Interfaces
ᅢリ ISO/IEC 24727-1 — Part 1: Architecture
ᅢリ ISO/IEC FCD 24727-2 — Part 2: Generic card interface
ᅢリ ISO/IEC FCD 24727-3 — Part 3: Application interface
ᅢリ ISO/IEC CD 24727-4 — Part 4: API Administration
ᅢリ ISO/IEC WD 24727-5 — Part 5: Testing
ᅢリ ISO/IEC WD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
¬タᄁ        ISO/IEC DIS 25961 Recommended Practices for Architectural Description of Software-Intensive Systems. See IEEE 1471
¬タᄁ        ISO26000 Guideline about Social Responsibility also called ISO SR
¬タᄁ        ISO/IEC 26300: Open Document Format
¬タ ᄁ        ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements
ISO 30000¬タモISO 39999:
¬タᄁ        ISO 32000 – Portable Document Format.
Advertisements
No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: